How Plastic Types Available

The exact number is unclear. Plastic is not only one of the ingredients that made the same way every time. Although the plastic can be broken down into broad types or categories, there are actually thousands of different plastics, each with its own composition and characteristics. One plastic can block the oxygen to reach the food. Other possible but difficult transparent as glass. Or stretch and get back in shape.

That's why plastic is used in many ways: they protect our food, protect our homes, improve our cars gas mileage, keep us dry when it rains ... and many other things.

Plastic is the result of a mixture of chemical and engineering. As innovation marches, scientists and engineers can make new plastic to do more and more things.

So even though the amount is not clear plastic, plastic makers tend plastic into two general groups of classes: thermoplastics and thermosets.

Thermoplastics can be re-melted and basically back to their original state as a way kind of ice can melt and then cooled again. Thermoplastics are usually produced first in a separate process to make small pellets; This pellet is then heated and molded to make all kinds of consumer and industrial products. Thermoplastic including plastic you may be familiar with: polyethylene, polypropylene, polyvinyl chloride, polystyrene, nylon, polycarbonate, and others.

Thermosets are usually produced and formed into a product at the same time-and they can not return to their home countries. They are generally formed using heat and be "set," such as eggs cooked. Thermoset including vulcanized synthetic rubber, acrylic, polyurethane, melamine, silicone, epoxies, and others.

There is another category of plastics:

Engineering plastic ... Has good mechanical properties have been improved and engineered often greater durability. For example, impact-resistant polycarbonate. Polyamides such as nylon against abrasion. Some combination of plastic, such as ABS is very difficult (acrylonitrile butadiene styrene). List of engineering plastics long enough.

Plastic fibers precisely that: a plastic that has been spun into fibers or filaments which are used to make cloth, rope, ropes, fiber optic cable and even body armor. Most plastic fiber is strong, elastic, and stable under heat (so that the fabric can be ironed). Some of the most known plastic fibers are polyester, nylon, rayon, acrylic, and spandex, although there are many more. (Note: sometimes called polyethylene terephthalate polyester-it is also used to make plastic water bottle which can then be recycled into fibers for clothing, such as fleece jackets and t-shirts).

There are many more categories, such as coatings, adhesives, elastomers and rubber, which includes the plastic used in everything from outside the shuttle to food packaging.

Discuss Maritime: Offshore Industry Growth Continues Driven

The main activities of the offshore construction industry is fabricated in support of oil and gas sector in Indonesia and the development of the offshore construction industry also is in order to improve the ability of the national maritime industry.

Director of the Maritime Industry Aerospace and Defense Equipment (IMKAP) Ministry of Industry, Hasbi Assidiq Syamsudin in a chat with the Maritime Industry said that the rise in world oil prices has also encouraged the growth of the offshore construction industry. "Offshore construction industry should continue to be developed because it is very closely related to the shipping industry. Therefore, the ability of the offshore construction industry should continue to be maximized," he said.

According Hasbi, now the number of industrial buildings of 30 units offshore industry. Meanwhile, the Indonesian archipelago filled with approximately 17,500 islands with a coastline of 80,000 km has potential oil reserves are very large to be explored, namely 7.408.24 MMSTB.

Hasbi said that oil and gas energy is still the mainstay for improving the economy of the country, where the growth of energy consumption in Indonesia reached 7%, so it is necessary efforts to meet the energy needs through peningkatana exploration through engineering ability and the ability of the fabrication of offshore structures.

Here is a list of some of the offshore construction industry in Indonesia:

PT. PAL Indonesia, PT. DKB, PT.DPS, PT.Gunanusa Utama, PT. Saipem Indonesia, PT. Tripatra, PT. Sembawang Marine, PT. Reka Patria, PT. Pillar Pradhana, PT. McDermot Indonesia, PT. Akner Kvaerner, PT. PROFAB Indoneisia, PT. Nippon Steel Batam, PT. Dry Dock Indonesia, PT. Graha Trisaka Industry, PT. Tecnic Offshore, PT. Adiguna, PT. Calmarine, PT. Prime karta Perkasa.

Industry Support Domestic Component (Deck Equipment):

PT. PINDAD, PT. ALSTOM Indonesia, PT. Indonesia Magma Chain, PT. Ungaran Multi Engineering, PT. Boma Bisma Indra, PT. Krakatau Steel, PT. General Jaya Steel core, PT.Gunawan Dianjaya Steel, PT. Mountain King Paksi, PT.Hanil Jaya Metal Works, PT. Java Garden Steel, PT. Magnificent East Steel, PT. Mount Gahapi Sakti, PT. Krakatau Wajatama, PT. Kabelindo, PT. Tadakara techniques, PT. CORE, PT. LEN, PT. To Electro, PT. Nobi Son Space, PT. Union Aesthetics Makmur, PT. Duet Dharma Utama, PT. Jembo Cable, PT. Tesco Marine, PT. Earth Light Excellence and PT. Ebara Indonesia.

Potential Indonesia Could Be Largest State 5th Industry World

This dream can be achieved if Indonesia can realize downstream mineral program. The business community is optimistic that Indonesia could become the world's fifth largest industrial nation in the next five years.

Kadin assess efforts to accelerate the realization of mineral sector downstream program requires commitment Incorporated in Indonesia, among others, the government <Chamber of Commerce, and the House of Representatives.

"We hope that when Indonesia rose as the world's major industrial countries later, Indonesia has a mineral and coal reserves and processing industries that support," Natsir said.

Businessmen assess the development of processing and refining industries (smelters) conducted for the benefit of Indonesia as a country that has been the industry has a structure that is less healthy.

For the development of a smelter, Indonesian Chamber of Commerce proposes to focus on five sectors namely mining of copper, gold, aluminum, nickel, and iron. Even if necessary, Indonesia can develop aluminum smelter.

With a period of 5 years to become the world's largest industrial countries through downstream Mining, Chamber considers Indonesia still has time to fix the existing regulations.

Rising Plastics Industry

JAKARTA - Inaplas (Arimatik Industry Association, Olefin and Plastic) record the number of plastic production in the country will grow 7 percent this year. Least advanced plastics industry, depending on the progress of economic growth.

Vice-Chairman of the Business Development Sadiman Inaplas Budi Susanto said, with economic growth of 5.6 percent to 5.7 percent, the growth in the production of plastic this year is higher than the economic growth. It was believed to be due to the existence of the democratic party elections which encourages increasing the amount of plastic consumption.

"With the democratic party, bring plastic consumption. Hire plant-bottle for the food and beverage, food and beverage industry campaign to make rapid progress, 27 thousand people that require 5 percent of plastic," he said in a written statement on Wednesday (16/04 / 2014).

Budi added, the constraint is in terms of the price of raw materials is much more expensive because it is imported materials. But the one hand the current world oil prices fell 10 percent.

"In addition to the elections, it had a positive impact. PLN But the barriers are meeting tomorrow will naikin electricity prices, the impact is large, both the raw material is electricity. Thing that could raise the cost of production, and increase competition especially ahead of the AEC, the competition would guess - a guess, If baseball is ready to face the plastics industry, will be lost, "he said.

In conclusion, Budi said, the plastic industry in the country is highly prospective, driven by the development of food and beverage industry, as well as in agriculture such as fertilizers plastic, plastic-harvest, post-harvest.

"In Java farmland narrowed but productivity rose 50 percent. Industry us it was nice, because it was in the international exhibition Indoplas plastics industry, Indopack, and Indoprocess and Indoprint 2014, the plastics industry will take advantage of the search engine exhibition - Hi Speed ​​machine," he said .

Plastic consumption figure of 2.5 million tonnes per year while demand 4 million tons. The rest of 1.5 million tons are imported. If this year does not go up 7 percent, then the domestic production will not increase, the greater import.

Managing Director of Messe Dusseldorf Asia, Gerno Ringling said Indonesia has a great potential in the plastics industry, packaging and printing and increasingly transformed into a very interesting market in the Southeast Asian region. With a population reaching 242 million people, Indonesia is predicted as the seventh largest market in the world by 2030 with 135 million consumers.

"Behind the success of this exhibition, we are sure Indoplas, Indopack, and Indoprint 2014 will experience growth not only in terms of area fairs as we continue to meet the needs of the market, but in terms of the number of visitors we are targeting 25 thousand visitors on 3 September to 6 September 2014," he said.

National Industrial Policy

National Industrial development vision as stated in Presidential Decree No. 28 Year 2008 on National Industrial Policy is a Tough Industry Indonesia became the State in 2025, with the vision in 2020 as the New Industrialized Countries, because according to the Bogor Declaration of 1995 between the heads of APEC countries in the liberalization in APEC countries has to be realized.

As the newly industrialized countries, industrial sectors Indonesia should be able to meet some basic criteria, among others: 1) Have a high role and contribution to the national economy, 2) SMEs have the capability by Industrial Large, 3) Have a strong industrial structure (Tree Industry complete and in), 4) Advanced technology has been spearheading the development and market creation, 5) Has had a tough industry services into supporting the international competitiveness of the industry, and 6) Has had to face competitiveness full liberalization with the countries APEC. It is expected that in 2020 non-oil and gas industry's contribution to GDP has been able to achieve 30%, where the contribution of small scale industries (IK) plus medium industrial (IM) is equal or close to large industrial contribution (IB). During the period of 2010 until 2020 the industry should grow at an average growth of 9.43% with IK, IM, and IB respectively a minimum of 10.00%, 17.47%, and 6.34%.

To achieve these targets, efforts need structured and measurable, which must be translated into a strategy map that accommodates the desire of stakeholders in the form of strategic outcomes consisting of: 1) The increase in value-added industries, 2) Increased market share at home and abroad , 3) Pharmaceutics factors supporting industrial development, 4) Increased ability of innovation and mastery of energy-efficient industrial technologies and environmentally friendly, 5) Gains and complete industrial structure, 6) The increasing spread of industrial development, and 7) The increasing role of small industries and medium to GDP.

In order to realize these targets, the Ministry of Industry has set two approaches to building a national industrial competitiveness and integrated tersinergi between the center and the regions. First, through a top-down approach to the development of 35 industrial clusters planned priorities of the Centre (by design) and followed by the participation of selected areas based on international competitiveness as well as the potential of the Indonesian nation. Secondly, through a bottom-up approach to the determination of the core competencies that are the hallmarks of industrial areas, which helped build development centers, so that the region has a competitive edge. Development of core competencies in the province called the seed industry in the province and district / city called Core Competence Industrial District / City. The second approach is an approach that is based on the spirit of regional autonomy. Determination of industrial development through the establishment of a priority industrial clusters and industrial core competency area is needed to provide certainty and have the support of all sectors in the economy including banking support.

Currently has composed 35 Priority Industry Cluster Development Roadmap, namely:

Agro Industry, consisting of: (1) palm oil processing industry; (2) Manufacture of rubber and rubber goods; (3) Manufacture of cocoa; (4) oil processing industry; (5) coffee processing industry; (6) The sugar industry; (7) the results of Tobacco Industry; (8) the fruit processing industry; (9) Manufacture of furniture; (10) Industrial fish processing; (11) The paper industry; (12) the milk processing industry.

Transport equipment industry, including: (13) Manufacture of motor vehicles; (14) The shipping industry; (15) aerospace industry; (16) Industrial railways.

Industrial Electronics and Telematics: (17) Industrial electronics; (18) the telecommunications industry; (19) Manufacture of computers and equipment

Manufacturing Industry Base, include:

Basic Materials Industry: (20) Iron and steel industry; (21) Cement Industry; (22) The petrochemical industry; (23) Industrial Ceramics

Industrial Machinery (24) Industrial electrical equipment and electrical machinery; (25) Industrial machinery and general equipment.

Solid Manufacturing Industry Employment: (26) Manufacture of textiles and textile products; (27) The footwear industry;

Creative Industries and Creative Industries Support Specific: (28) Industrial software and multimedia content; (29) The fashion industry; (30) Industrial craft and art items.

Small and Medium Industry Specific: (31) Industry precious stones and jewelery; (32) Industrial salt people; (33) Manufacture of pottery and decorative ceramics; (34) Manufacture of essential oils; (35) Industrial snacks.

The province has developed a roadmap leading industrial province consists of 18 provinces, namely: 1) AT Yogyakarta, 2) Central Sulawesi, 3) Papua, 4) West Sumatra, 5) South Sumatra, 6) Lampung, 7) East Kalimantan, 8) South Sulawesi, 9) Gorontalo, 10) East Nusa Tenggara, 11) West Nusa Tenggara , 12) of Aceh, 13) Videos, 14) Riau Islands, 15) Bangka Belitung, 16) of West Kalimantan, 17) Southeast Sulawesi, and 18) of North Sulawesi.

While the district / city has drawn up a roadmap core competencies of industrial district / city consists of 5 districts / cities as follows: 1) Pangkalpinang, 2) Luwu, 3) Palopo, 4) Central Maluku district, and 5) Southeast Maluku District . While other districts / cities are in the review process.

For more details, policy documents, roadmaps and results of the study can be downloaded at this address: http://rocana.kemenperin.go.id.

Function Moulds Venting

When the cavity space injected by plastic material, automatically empty space on the cavity will be filled with plastic material, the air in the cavity will be shifted to another place, what would happen if the air can not move, the air  will experience a high pressure , so the temperature rises even higher, resulting in plastic that fills the cavity will be burning, the defect is called a burn, because of the importance of venting a lot of products that fail due to not properly inject the gas vent, especially for products that have a rib that thin and tall, as compared to thick products. 

The function of the venting is Compressed  air release when compressed air is not expelled from the cavity, the plastic flow is inhibited, the result will be formed on a short shot of the product. Compressed  air will produce a gas with high temperature and burn the plastic around it, resulting in a defect burn marks, the product looks like a burn, this will greatly affect the look of the product. When  the gas mixed with plastic, the plastic will generate an uneven structure, which will reduce the strength of the product / mold parts produced, stress concentration also common in this region, which occurs due to the plastic notch.
part of venting, can divide on 2 section, land and groove, land is always contact with plastic melt, it's deep about 0.01 mm until 0.02 mm, depend on viscosity of material, relief of vent or gas land is about 1 mm until 2mm, but you must remember for rubber all the number above can't applied, gas vent on rubber material is very special, because rubber has low viscosity.
when designing the gas vent / venting on injection mould, make sure that all of the groove must have exhaust groove that connect to atsmosfer.
In modern plumbing, a drain-waste-vent  is part of a system that removes sewage and grey water from a building and regulates air pressure in the waste-system pipes, facilitating flow.  Waste is produced at fixtures such as toilets, sinks and showers, and exits the fixtures through a trap, a dipped section of pipe that always contains water.  All fixtures must contain traps to prevent sewer gases from leaking into the house.  Through traps, all fixtures are connected to waste lines, which in turn take the waste to a soil stack, or soil vent pipe.  At the building drain system's lowest point, the drain-waste vent is attached, and rises (usually inside a wall) to and out of the roof. Waste is removed from the building through the building drain and taken to a sewage line, which leads to a septic system or a public sewer. Cesspits are generally prohibited in developed areas.

Design | Injection | BlowMould | DieCasting | WorkShop | TechShop | Holiday 

Designing the Runner System in Plastics Mould

first-time we must consider items that affecting  runner size, some of whichVolume of part, the greater the volume takes a larger diameter runners anyway.Weight of part, the heavier parts, it takes a larger diameter runners. Wall thickness, the thicker the greater the diameter of the runner is needed.Length of flow path, the longer it takes the flow of large diameter runner.

Diameter

to determine the diameter, based on the type of material and wall thickness, the following chart can help, for similar materials PP, PA, POM, PC, PE can use the following graph, first select the appropriate thick wall thickness and look heavy parts, and then pull the line down, the approximate diameter required will be obtained.


Design | Injection | BlowMould | DieCasting | PunchingTool | WorkShop | TechShop | Holiday

GENERATION OF FAST GROWING

To welcome the development of fast-paced, it is necessary once more obtimal machining devices, and fast-paced production is time and carefully for the development of global markets.
As product and part designs become more sophisticated, mould manufacturers are increasingly called upon to proses shapes comprising three dimension free form curves. We are being forced to rapidly and efficiently produce  highly complex mould for compression and injection moulding  while simultaneously adapting to a rapidly changing business environment characterized by shift to overseas production ,more frequent model changes ,and intense demands for manufacturing cost reductions. To meet the all these demands, mould manufactures are developing increasingly systematic operations that utilize computerized information for everything from design to production control and actual manufacturing.

It is against this background of urgent necessity that some new processing technology the use multy axis machining centers and tree dimension model to prosess moulds rapidly with top quality will be discussed. The multi axis machining described utilizes up to six controllable axes, tree translation axes and tree rotating axes.

Multy Axes Machining Center

One of key to processing mould efficiently, maintaining high precision and high quality, is to avoid multiple settings and installations of the machine and workpiece. A single set prosess will reduce the errors that arise with die changes and improve machine utilization times. The objective is a single machine that can implement compound processing , performing in rapid succession all tasks from rough cut to finish. Multy axis processing machines make possible a variety of special features.

A Five axis machining center with its tree translation axes and two rotating axes can be achieve a wider variety of tool positions than a conventional tree axes machine, thus eliminating the need for die changes even when processing overhangs and other complex shapes. Such machines have existed for twenty years, but given the complex structure of five axes machining center, they were difficult to control and were rarely used except for highly specialized processing task. Today ,progress in design and control technology is opening the door to many more applications. Because of the abvious advantages of single set processing for high efficiency, high precision machining, the industry is turning expectanly towards multy axis machining for general use.

In conventional processing, cutting speed is often increased by rotating both the tool and the workpiece. Where the workpice itself is rotated,  all the shape to be cut must be round or combination of round shape, Even where it is the tool being rotated, a corner R is inevitable. These restrictions result from the rotation. Processing methods that eliminate these restrictions have the potential to vastly expand the variety of shaes that can be machined.

To this end,it is proposed installing on the main axis of machining center a non rotating tool with tree dimensional control of tool position and location. This method requires six axis control. Because  it makes cutting speed equal to feed speed, it is not extremely efficient. However, it does produce very high quality and is extremely useful in processing shape that cannot be achieved by rotating tool.

The six axis machining center and a non rotatin tool. If you disable the main axes rotating index control and limit it to ordinary rotation, the six axis machining centre becomes a five axis machining centre. By fixing two of rotating axis , you can use it as tree axis machine as well. But when needed, you can achieve outstanding result using full six axis conrol.

Compound Machining Fungtions and Tool, Control Techniques

Process   ; High speed rough cut.

Tool        : Rotating tool

Control Technique :  Tree axis /  Five axis.

Process   : Intermediate finishing.

Tool        : Rotating tool.

Control Technique : Five axis.

Process  : Finishing.

Tool       : Non rotating tool.

Control Technique : Six axis.

Process  : Polishing.

Tool       : Non rotating tool.

Control Technique : Six axis.

                We have discussed new techniques using multy axes machining centre for fast, high quality processing of mould, Because five axis machining centre using rotating tools can process complex shapes with fewer tool and setting changes, the will undoubtedly be used for an ever expanding range of applications. We have also described  six axis methods using non rotating. These methods  have great potential for increasing  efficiency and expanding the range of shape  that can be fully processed by machine. Six axis machine that can take complex workpice, installed only once, from rough cut to finish at high speeds with high precision are going to have a mayor influence on mould production. Let us wait, enjoy, stand and watch it together all the technological advances that can benefit the well-being of mankind throughout the world. Hopefully everything is more prosperous.

Design | Injection | BlowMould | DieCasting | WorkShop | PunchingTool | TechStore | Holiday

INDUSTRIAL TRANSFORMATION

With the development of a business, you should start to see the possibilities for strengthening the possibility that has been achieved. 

Even this situation needs to better handling and the need to use appropriate methods to policy management policies.The one that looks real is more concerned with the principles of dynamic efficiency.

 As we know that the cost of the costs for the production process is very high, therefore the effective and efficient measures should be involved in the handling.Within the company as it headed toward the development or already developed ones, need to implement specialization emphasizes the importance of each sector of a global business process. 

This concept to be oriented, that growing either forward or the economy is still growing, can only be maintained if less exploit natural resources intensively and even tend to be large scale. In the production cycle of a multiple folding occurs very rapidly and is the mass of the types of consumer goods. Unlike the manufacture economic activity based on the information industry, seen as less dependent on natural resource extraction process directly. Besides, expansion of this sector requires social and environmental cost is relatively low when compared with the expansion of industrial manufacture.

 After a decade of ongoing forms of industrial society, a new society that is the information currently in the process. Riel tender can be seen in the fact that almost every aspect of modern society can not be separated from the information or at least touched by industrial product information that tends increasingly demand.                                                                                             

 Not only in the consumption of modern society, but further information including the sub-sector business support products to be one of the dominant production base in the structure of global economic growth. Economic slow activity distorsed to provision of information services available in the form of basic materials and even the interpretation of events with the community imagine.

 Different manufacturing industry that has been shown to cause pollution or chemical contamination of the environment, expansion of industrial activity information takes place with the environmental costs of such minimal. If on the other hand there is something fundamental to the argument that the industry more environmentally friendly than manufacturing industry, service sector in modern economies increasingly dominant information but there is a tendency, that the volume and variety of consumption goods will rise relative manufacture . We too believe that the information has been changed and transformed as a commodity product that is very broad.

Design | Injection | BlowMould | DieCasting | PunchingTool | WorkShop | TechStore | Holiday 

SHIFT IN MARKET VALUE

Economic globalization continues to this day, making the economy began showing signs of a positive for those who can anticipate, but contrary to that get stuck in old patterns of thought. to show no obstacle in the world economy is now .there are more intense and was otherwise little is pailed.
We be aware of this process, some of them forced to face a grueling global economic competition, to be fought heavily against its rivals, productifity improved, the stake of each decade of the inevitable impact of excess production and prices will fall.
 Other countries that produce the same manufacturing, and the competition of imported goods will be complicated and uncertain.
After the economic movement looks like is irrelevant, then what we need to do?.By studying and see something that has already occurred, and do not forget the many considerations, the need for drastic change strategy!.
And make the production as the spearhead of the economic engines that are deployed to mobilize and mobilize all resources, and only produce products of high value or strategic products.
Hence the need for new strategies, began to shift from high-volume products to high value products, companies no longer make the goods that are less effective but should be a new technological innovation or improvement of technology into its flagship.
This high-value production processes no longer be uniform, regular or standard, and is no longer determined by the volume or price. determining factor is the appropriate expertise and occupies a specialized market and corporate businesses focus so-called "special knowledge".
We also argue for a business like this takes fertilize them belonging to the category of public analisis plus technology solutions.
The definition, workers are able to describe the problem, which is familiar with the specific knowledge, such as specialists and more importantly be able to catch up to the amount of product sales target community needs.

Design | Injection | BlowMould | DieCasting | PunchingTool | WorkShop | TechShop | Holiday 

re-Examine Industrialization

With the development of a social life, it also demands increasingly diverse demands of sustaining life.
In their daily lives must realize that in a highly competitive business world today, the management skills to perform better and will stand out amid the business market.
One often finds goods or services that a large number seangat in quantity, quality and variety is reflected in the variety of usage models.
There, also produced by the suppression rates as efficiently as possible and able to develop a more adequate technology and environmentally friendly, will make an endemic area.

Picture of developments over the world who continue to demand anticipation.
Variety of industrial policy which is distortions and slow impressed with the wisdom is not transparent and not directed, tend to favor one group alone should begin to be reviewed, and should begin to be abandoned, then look for a definite direction.
In terms of current industrial development can be roughly seen symptoms market concept into a supermarket, each making products according to the field or analysis.
And industrialization policy must be made not only for the sake of pride and national interest, but have to go to creative thinking in the face of consumer willingness of a social life.

How or where can seize enhance competitiveness to face global competition?.
Thus the extra power needed to analyze the products needed in the market, of course with a new strategy in which the product being traded is not the kind of service standards as they are known in the trade during this short abstract simplified all the things that have to be rearranged, processed, experimented then communicated to those concerned then transformed back into a new idea on the market, this is no longer with the ability to solve a problem, but much closer to understanding why the problem exists and how these issues relate to the problem.

Such measures aim to source the above resources more efficiently or move a financial asset or savings of time and energy.
Another type of solution strategy to find innovative, new advertising, which it will make people believe that new innovations it is a necessity of life.
Another form of the product sold must bevalue, please people or make people reflect on themselves in depth.
Then attempt to fill this type of work that has the foresight or the accuracy of the order, and has the advantage of technology to be able to drive to a place more perfect than the progress that has been there, it is necessary in order to remain able to adapt to the changing nature and development.
This sort of booming business will be determined by market appetite.

Design | Injection | Blow Mould | DieCasting | PunchingTool | WorkShop | TechStore | Holiday 

THE NEXT GENERATION MACHINE TOOL

Complate all operation : turning, milling, drilling, hardening and grinding in single mache setup.
The E is designed to simplity comlicated manufacturing systems and provide comprehensive to machine as well as management.
Workpices can be completed in single machine setup to realize the minimum in prosess time in a machine shop.This macine will bring a revolution to your shop floor.


Tower For Operators and Management

* Proper instructions ensure production scedule is observed
* Minimize unproductive idle time
* Help fungtion assists operators improve overall machine operation
* Faster machine recovery from alarm state

Mobile Telephone Display

* Machining completion report
* Machine alarm notification
* Machining time display
* Other productin information

Examle Verbal Mesage to Operator

* Estimated time of machining completion
* Machining completion notification
* Machine in alarm state notification
* Maintenance required  notification,and other.


We specialize in manufacturing various MoldDies consultant : Die Casting, Punch Dies, Extrusion, jigs and fixtures, Plastic Injection Molds, such as plastic caps plastic injection molds, Injection Molds for the screws, gears, buckets, Plastic Injection Molds for bottles, electronic components and all Molds for injection molding and blow molding. In addition, pe we've made ​​more than 1000 companies of various molds for the plastics industry.
 
Our professional engineers in software to optimize the latest CAD / CAM to develop mold and die design of both 2D and 3D parts. From design to final product is an integrated discipline manufacturing processes to produce high quality finished product.
using the industry standard as far as possible from suppliers, and Progressive Components, so that longer used and are easily damaged components can be easily replaced with a standard item on the shelf catalog. This can help reduce the damage, all maintenance costs lower than molddie makers who do not use standard components.
 
Our engineers are very proud to be able to help meet your needs, using advanced computer aided design and manufacturing technology. Each mold and punch we make will meet or exceed your specifications for quality. We use only the best steel material, heat treatment and surface treatment are available these days, because we want you to make future tooling projects.
 
Our toolmakers build tooling in various sizes and shapes ranging from the simple to the geometry of the most complex and challenging. With a comprehensive tool and moldie making capabilities, we can provide as well as single and multicavity die cavity completely interchangeable for standardization and repetition in some of the major program.

Design | Injection | Blow Mould | DieCasting | PunchingTool | WorkShop | TechStore | Holiday

HOW to be Mould Maker

Companies that want to win the competition is a company that is able to continuously improve service quality, service quality has an increasingly important role in satisfying the customer.Customers as assets is a satisfied and loyal customers, therefore need a broad understanding of the customer to be satisfied interchangeableMajor or important step is to understand customer needs and expectations, this can be done by listening to their input as well to communicate and learn the needs of customers.Workshop on the Workshop MoldDies goal is to become "moldmaker Options" or to be able to support the machining within a company. Activities of designing and producing plastic molds or the like with a better quality by using the short time required to cost efficiently as possible. Experience gives the advantage that more knowledge in the design and manufacturing capabilities in moldmaking, can also cope with the doubling when the mold should be done outside, especially for products protected by law.Rapid handling is a big part of the core competencies in the success of a business. Mold mold units can be completed in the shortest time possible. Handling of a regular job in a controlled machinery will guarantee the carrying capacity for the development of an enterprise.Plastic Mold, Diecasting mold is a specialist in designing and building to be developed.Metal Injection Mold mastery of the material type of steel. High tolerance and specific requirements for material selection, design and workmanship is the knowledge that needs to be owned. Workshop MoldDies can apply the applicable requirements of ISO Tolerance.Worshop MoldDies specification can design and make prints up to size 1000x600mm 'to make prints up to + -3 tons weight. Classification Mold Hot runner mold, blow streth, center gated, site gate, subsumerin, auto unscrewing, compression and transfer mold, thermoforming, extrusion, Slide Mekanikpunch dies, diecasting, Grafity cast, jig and fixtures, but also for repair work, or modification of the mold also can work on construction machinery. Welding is often necessary also for the improvement of the oral cavity. Workshop Productions MoldDies hope to produce better than the requirements of moldmaking and make "moldmaker Options".Using the appropriate process technology for producing molds and other types of machining. 3D CAD / CAM programming CNC Milling, manual Milling, Turning, Driil Radial, Surface Grinding and EDM allows to handle the cost of making molds and dies for use in their own companies to increase revenue or job order, vasiltas machining is usually plus or minus depending on your needs.FacilityCNC Milling. Worshop MoldDies cnc required specifications with the ability to + -10 000 RPM and the size of the table 1000x600mm.control min FANUC 0i.untuk cavity supports the creation of approximately 60% of those working on the mold set.Milling Manuual & Radial Drill, for milling using standard Milling capacity 3S, 4S and also w ith for Facing. Milling machines are useful for the manufacture of the mold base and other auxiliary machinery, the operation all milling machines are regularly used for mold making and supporting equipment.With pallet horizontal milling capabilities allow Ingestion aside and work surfaces are roughing more efisien.Radial Drill sizes are usually required to tool diameter +-32mm.Machine is used for the manufacture of cooling and the like.EDM sparks leap in the ability of the electrode on the workpiece that is used for the manufacture of cavity which has a specific shape or elbow, adjustments to the operation as a key component for smoothness adjustment in accordance with the desired fineness., Also used here to provide the benefits of texture on the surface of the cavity production, making a very small hole venting hole diameter material in the form of soft or hard steel. Engine size needed 600x400mm.50 AMPR table.Surface Grinding uses to flatten and smooth the surface, also made a mold parallel, 600x400mm.mesin min size is also very important in the process maintenand mold.Turning the size of which is often used to worshop L5X1000mm and lathe mold pin, or if the remedy to use large capacity lathe frogs, these machines are used for manufacturing shaped components silidris and the like.Bench Work, Welding and Dreamer are used for process improvement, finishing and revision.Area: to place the machines, table setting, space engineer, space and place tooling material, required +-200m2.MoldDies Manufacturing Principles Workshop is a workshop that followed his time with the advanced team work. With adequate technology and manufacturing methodologies to continually improve, to remain efficient, competitive and provide the tools with the right resources.Concluding this paper is based on my own experience in operating the workshop, but of course still a lot of flaws here and there, suggestions, criticism and feedback so I would expect.And the end, on this occasion I would like to say many thanks to everyone for all the attention, and good success.

Design | Injection | Blow Mould | DieCasting | PunchingTool | WorkShop | TechStore | Holiday 

Mold- Dies and Casting

The contuining development of dies mold tecnology demands more and more of processor.the most important problem in the process of dies molding is undoubtedly the corrrect design of the mold dies because the mold dies shop has little influence,if any.on construction of machine.
Efficient production of the most diverse molded parts depends primarily on the mold dies.

Durability of the mold dies depends on their core and treatment.Since ground,they should produce between 500.000-1000.000 shot.

For ease of contruction and the lower manufacturing cost.mold dies are becoming standarized.some forms offer ready made base of square or round design as standart of stripper plate mold dies for immediate use.
Only the insert then have to be fitted into the base.

Design| Injection |Blow Mould | DieCasting | PunchingTool | WorkShop | TechStore | Holiday